CN
AKC370 MEMS
voltage Vibration sensor

Ethernet high-frequency

Triaxial MEMS Vibration sensor

0.5-4.5V output

Measurement range ±2g~±16g

Self-test function

Wide operating temperature range -40℃~+85℃

  • Product Description
  • Scope of application
  • Parameter
  • Dimensions
  • Download

Product Description

The AKC370 is an analog output Vibration sensor based on single-crystal silicon MEMS capacitive sensing technology, with an output voltage range of 0.5-4.5V. This sensor employs advanced internal compensation technology to ensure excellent linearity and long-term stability. Its features include:

1. Electromagnetic compatibility (EMC) and radio frequency interference (RFI) shielding;

2. Low power consumption design;

3. Multiple ranges selectable from ±2g to ±16g;

4. DC-coupled output;

5. Operating frequency band: 0-200Hz;

6. Integrated self-test function for real-time sensor status monitoring;

With its reliable performance and cost advantages, the AKC370 can be widely used in various vibration measurement and motion detection scenarios.

Scope of application

Bridge impact monitoring

Wind power

Traffic system monitoring, subgrade analysis and high-speed railway fault detection

Large machinery and engines

Low frequency vibration and automatic monitoring

Medical equipment

Bridge

Car

Roller

PARAMETERS

AKC370

Parameters

Measurement Range

±2g~±16g

Measuring Axis

X,Y,ZAxis

Resolution

<1mg

Zero-Point Acceleration

2.5V(Voltage Output)

Full-Range Output

0.5-45V(Voltage Output)

Linearity

1%

Power-On/Power-Off Repeatability

<2mg

Response Frequency

0 -200Hz  Integrated low-pass filter

Bandwidth

200Hz@ 3Db

Shock

>100g@11ms(half sine wave)

Shock Recovery Time

<1ms

Operating Temperature Range

-40~+85℃

Storage Temperature Range

-40~+85℃

Supply Voltage

9-36VDC

Maximum Power Consumption

35-38mA@12VDC

Noise Density

<25µg/√ Hz @ ±2g

<60µg/√ Hz @ ±16g

Maximum Calibration Uncertainty

<1mg

Electrical Protection

EMC and RFI shielding

Reliability

MIL-HDBK-217 Level 2

Self-Test

±1g @ 10Hz ST line grounding

Protection Class

IP67

Product Dimensions

L55×W37×H29mm

Product Weight

≤100g(excluding cable)

Dimensions


Size description

  • Shell size

    L55×W37×H29mm

  • Installation size

    L48×W28.6×H4mm

  • Mounting screws

    3 M4 screws

Specifications and Software

* Please contact the online sales engineer to obtain the product specification of Rion, or email sales@rion-tech.net to obtain it.

Disclaimer
This product is developed exclusively for commercial applications and is prohibited from being used for illegal purposes, such as military activities, research related to nuclear, chemical, or biological weapons, or any other actions that violate laws and regulations. It is strictly forbidden to engage in activities related to goods embargoed by the United Nations, the European Union, or the OSCE, as well as any other activities prohibited by the Export Administration Regulations. Without the written consent of our company, this product must not be transferred to any third party. Purchasing this product signifies your acceptance of this disclaimer and your agreement to sign the related liability agreement. If these regulations are violated, all responsibilities will be borne by the purchaser, and our company will not be held liable.